O'Fallon ~ Belleville IL Damage-Free Wheel Alignment Service
Mission Accomplished Tire & Auto is one of only a few auto repair shops offering a wheel alignment service in the St. Clair County & Clinton County areas using the HawkEye Elite® Alignment System from Hunter Engineering. When it comes to alignment technology, most systems used at other wheel alignment shops in Belleville, O'Fallon, and New Baden do not even come close to matching the power of our shop's HawkEye Elite® equipment. The HawkEye Elite® is unequaled when it comes to doing wheel alignments on the intricate components of today's modern vehicles being driven around St. Clair and Clinton County. The HawkEye Elite® uses cameras that are mounted precisely to measure locations and orientations of targets that are mounted on our client's wheels using another incredible technology developed by Hunter known as QuickGrip® adaptors.
Featuring arms that are spring-loaded for optimal gripping of tires, these adaptors minimize tire & wheel damage by eliminating metal-to-metal contact on Belleville, O'Fallon, and New Baden clients' valuable rims. Additionally, the fact that the results can be viewed in as little as 70 seconds, helps to make our 3 shops in Belleville, O'Fallon, and New Baden overall efficiency rating one of the very best in both St. Clair and Clinton County, getting our clients and their vehicles back on the road as quickly as possible.
Featuring arms that are spring-loaded for optimal gripping of tires, these adaptors minimize rim damage by eliminating metal-to-metal contact on our clients' valuable rims. Additionally, the fact that the results can be viewed in as little as 70 seconds, helps to make our 3 shops in New Baden, Belleville, and O'Fallon overall efficiency rating one of the very best in St. Clair County and Hamilton County areas, getting our clients and their vehicles back on the road as quickly and safely.
Quick Setup & Results
The HawkEye Elite® returns results 70 seconds.
Reduced Setup Time
Alignments require but one trip around the vehicle.
Fast Accurate Measurements
Camber, toe, and caster are represented with easy-to-understand graphics.
The technology of the HawkEye Elite® used at our shops in Belleville, New Baden, and O'Fallon is undoubtedly beyond that found with other alignment machines found at most other shops in St. Clair County and Clinton County automotive repair places. Listed below are comparisons between what is used by the technicians at Mission Accomplished Tire & Auto with older systems employed by other auto mechanics in New Baden, Belleville, and O'Fallon. Combined with other equipment used by Mission Accomplished Tire & Auto, this cutting-edge technology is what helps to distinguish our business as one of the best in the Belleville, New Baden, and O'Fallon areas when it comes to fixing & servicing vehicles.
Precise accuracy is achieved with the 4 strategically placed cameras. QuickGrip® adaptors offer quick readings with their narrow and light design.
- 1 walk circling vehicle
- 0 console interactions
- 72 total steps
Traditional rack technology utilizing camera-sensors yielded 4-minute results, better than older technology, but not good enough.
- 3 walks circling vehicle
- 6 console interactions
- 183 total steps
It required 10 minutes to yield results with an antiquated conventional wheel-mounted sensor system using traditional rack technology.
- 4 walks circling vehicle
- 6 console interactions
- 246 total steps
- 1
Minute - 4
Minute - 10+
Minutes
Decreased setup time with QuickGrip® technology
Fast installation
Advanced clamping technology installs easily, with off-center placement not compromising efficiency.
Rim damage avoided
No metal-to-metal contact with protective ring & clamps hooking tires
Optimal design
QuickGrip® adaptors are greatly appreciated by our expert team of technicians.
- Tires gripped by spring-loaded arms
- Clamp secured with thumb screw
- Accuracy unaffected by off-center clamping
- Only tired is gripped
- Rims safeguarded by protective ring
- 50% lighter (6 pounds) than former designs
- Void of electronics, cables, or calibration
- Minimal cleaning needed
- Profile Approximately 9-inches
- Ease to work with
- Perfect for narrow shop bays
- Assemblies 37 inch & below accommodated
- 90% of applications work with one arm
Actual wheel position calculated by WinAlign® software, regardless of target centering
Connection with OBD-II port & VCI (Vehicle Communication Interface) enables ease of diagnosis & interaction.
Dynamic CalibrationsDynamic calibration when operating vehicle when necessary.
Forward-Facing Radar & Camera CalibrationsVehicle's front camera & radar sensors calibrated as related to direction of travel.
Blind Spot & Surround View CalibrationsRear & side vehicle sensors calibrated that driver uses for possible hazards beyond field-of-vision.
Vehicle's OBD-II is integrated with patented CodeLink® system to "connect" the steering angle sensors and the aligner to vehicle's specific alignment geometry.
110+ million vehicles require resetSince 2009, Hunter's equipment has supported resets of electronic steering systems. Numerous vehicle systems utilize electronic steering system output for determining the direction of travel.
Aligner integrationCodeLink® wirelessly integrates with Hunter WinAlign® systems using simplified guides aligner screen.
Mission Accomplished Tire & Auto uses the best tools & equipment for the clients of our auto repair shops in the Belleville, New Baden, and O'Fallon areas. Below are but a few of the awards earned by Hunter that exemplify the quality of technology used by our alignment specialists.
Extensive database
WinAlign® used by Mission Accomplished Tire & Auto is powered by an extensive vehicle database for 285 million vehicles in North America.
Vehicle-specific procedures
Our alignment technicians use detailed instructions specific to each vehicle being aligned.
30+ years of development
Mission Accomplished Tire & Auto benefits from Hunter's dedication to continual improvement using the undercar industry's largest R&D department.
Every alignment done by Mission Accomplished Tire & Auto is a streamlined procedure. Each job is analyzed and the best sequence of actions dictate the minimum amount of required steps.
WinToe®Straightened steering wheel achieved every time without requiring repeated steps or using a holder.
Tools& Part InformationSave trips back and forth to the toolbox by seeing all of the tools and aftermarket correction kits needed for each alignment. Efficiency is achieved by minimizing trips to the toolbox when viewing all necessary tools and aftermarket correction kits for each service.
Virtual View®Visual representation of caster, camber, and toe angles in real-time 3-D graphics.
Control Arm Movement Monitor®Step-by-step graphics reduce adjustment times significantly for front-shim, dual cam, or dual-slot vehicles and ensure the job is completed on the first attempt.
Ease of vehicle screening to determine collision & alignment needs
Shim-Select II®Difficult shim charts & tables are avoided. Shim-Select II® efficiently determines and displays the required template needed for proper installation of the shim.
Symmetry Angle MeasurementsSymmetry angles accessed immediately.
Automatic Bushing Calculator®Correct bushing size and position adjustment are achieved without wasting time utilizing a zero bushing, benefiting more than 10 million vans and light trucks.
Live Ride Height AdjustmentReal-time measurement and adjustment of ride height.
Mission Accomplished Tire & Auto is proud to share some of our clients' ratings and reviews. Our team strives to offer the best auto repair services in Belleville, New Baden, and O'Fallon, and we believe our hard–earned Google rating and client feedback below is a testament to our success in that endeavor.
